Who We Are
Specialty Geotechnical Contractors
Rocky Mountain Micropiles was founded by people who came up through the field — drilling, grouting, and building shoring systems before starting a company. That hands-on foundation shapes everything about how we operate: we estimate accurately because we’ve done the work, we solve problems on site because we’ve seen them before, and we deliver on schedule because we understand what it takes.
We’re a focused specialty contractor — not a general contractor who subcontracts geotechnical work, and not a consulting firm that designs but doesn’t build. We drill, we grout, we install, and we test. That’s what we do, and we do it well.
Our team works directly with geotechnical engineers, structural engineers, and general contractors to deliver micropile foundations, soldier pile and tieback shoring, soil nail walls, and slope stabilization systems across Utah and the Intermountain West.
Why Us
What Sets Us Apart
There are a lot of contractors. Here’s why general contractors, engineers, and owners choose to work with us.
We don’t subcontract our drilling or grouting. Our own crews operate our own rigs on every project — giving us direct control over quality, schedule, and safety.
Micropiles, soil nails, soldier piles, tiebacks, shotcrete, and slope stabilization — all under one contract. One mobilization, one point of contact, no coordination gaps.
We don’t hand over a grout log and call it done. Our micropiles are proof-tested to 200% of design load and tiebacks to 133% — you get documented, verified capacity.
Lake Bonneville clays, collapsible soils, Wasatch Formation sandstone, steep bench deposits — we’ve drilled through Utah’s full range of conditions and know how they behave.
We answer the phone, we return proposals quickly, and we mobilize when we say we will. When you’re managing a construction schedule, the last thing you need is a sub who doesn’t communicate.
We speak the same language as your geotechnical and structural engineers. We provide clear submittals, accurate installation logs, and test data that makes design verification straightforward.
How We Work
From Bid to Close-Out
We keep the process simple and transparent. You’ll always know where your project stands, what’s happening next, and who to call if you have questions.
Start With a QuotePlan Review & Proposal
Send us your plans, geotech report, or project description. We’ll review the scope, identify the right system, and provide a detailed proposal — typically within 24–48 hours.
Engineering Coordination
We work directly with your geotechnical and structural engineers to finalize the design, prepare submittals, and resolve any constructability questions before we mobilize.
Mobilize & Install
Our crews mobilize on schedule with our own drilling and grouting equipment. Daily progress updates keep your project team informed throughout the installation.
Test & Verify
Every micropile is proof-tested to 200% and every tieback to 133% of design load. You don’t get calculated capacity — you get documented, verified performance.
Documentation & Close-Out
Complete as-built records, installation logs, grout records, and test data submitted to the engineer of record and project owner. Clean, organized, ready for your files.
Services
What We Build
Six core service lines covering the full spectrum of specialty geotechnical construction.
Deep foundations to 1,000+ kips. New construction, underpinning, and seismic retrofit.
Earth retention and slope reinforcement with grouted bars and shotcrete facing.
Steel beam shoring with lagging for temporary and permanent excavation support.
Post-tensioned ground anchors proof-tested to 133% of design load.
Complete excavation support systems engineered for your project.
Landslide repair, cut slope retention, and hillside stabilization.
Who We Work With
Our Clients & Partners
We work as a specialty subcontractor to general contractors and as a direct-hire contractor for engineers and property owners.
General Contractors
We’re the geotechnical sub you can count on. Clean estimates, clear communication, on-time mobilization, and documentation that closes out without callbacks. We understand your schedule drives the project.
Geotechnical Engineers
We execute your designs accurately and provide the test data and installation records you need. When field conditions differ from the geotech report, we communicate immediately so we can adapt together.
Structural Engineers
Clear submittals, proof-tested capacities, and as-built records that make your design verification straightforward. We understand the interface between your structural design and our geotechnical installation.
Property Owners & Developers
If you’re dealing with a foundation problem, slope failure, or need geotechnical work for a new project, we’ll help you understand your options, connect you with the right engineer if needed, and get the work done right.
Service Area
The Intermountain West
Where We Work
Based in Utah, Serving the Region
Rocky Mountain Micropiles is based along the Wasatch Front and serves projects throughout Utah and the Intermountain West. The majority of our work is along the I-15 corridor from Ogden to Provo, with regular projects in Park City, the Wasatch Back, and Southern Utah.
We also mobilize for projects in Idaho, Wyoming, and neighboring states when the scope warrants it. If you have a project outside our primary service area, call us — we’ll let you know if we can help.